TERADEK BOLT PRO
Bolt Pro 600
The Teradek Bolt Pro 600 uses a new RF design that allows a transmission range of up to 600 ft line of sight, and it includes RP-SMA connections for external antennas on the transmitter. It supports wireless HD video with zero delay (<1ms) and up to 4 receivers. The transmitter accepts HD-SDI input, and the receiver outputs HD-SDI as well as USB 3.0 video and audio.
Price on Enquiry – Auckland | Wellington
More Information
Wireless HD Video with Zero Delay
- Transmission range of up to 600 ft line of sight
- Wireless HD video with zero delay
- Up to 4 receivers.
- Transmits HD-SDI or HDMI input and output
New Bolt Pro Transmitters
Like previous models, the new Bolt Pro systems offer the same great uncompressed, zereo delay 10bit 4:2:2 video transmittion over the unlicensed 5GHz band.
Bolt Pro 600 RX
The new Bolt Pro 600 is half the size and weight of the previous long range receiver and offers both HDMI and 3G-SDI outputs and mutiple RP-SMA antenna connections for increasing range and resiliency. The device has also been updated with an LCD, allowing you to check the status of you wireless link and pair additional Bolt systems when you’re out in the field.
GRAB Video Engine
The Bolt Pro 600 supports the optional patent-pending GRAB video engine, which turns the Bolt receiver into the worlds first wireless video capture card. With both 3G-SDI and USB 3.0 outputs, userscan monitor and simultaneously ingest Bolt’s uncompressed 10bit RGB video feed directly into a DIT Cart, NLE computer or live production switcher with no added delay or further conversion required. Since the GRAB engine supports the ubiquitous USB 3.0 Universal Video Class, you Bolt Pro receiver appears in any Windows or Mac applications that support video.
Inputs | 1 x 75 Ohm BNC 1 x Type A receptacle HDMI |
---|---|
Outputs | 1 x USB 3.0 micro B receptacle 1 x 75 Ohm BNC(Loop-out) 1 x 75 Ohm BNC 1 x Type A receptacle HDMI |
Supported Resolutions | 1080p60/59.94/50/30/29.97/25/24/23.98 1080psf30/29.97/25/24/23.98 1080i60/59.94/50 720p60/59.94/50 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) |
Audio | Format support 48kHz 24-bit PCM |
Physical Size | Receiver: 4.3″ x 2.6″ x 1.1″(109.2 x 66.0 x 26.7mm), 9.9oz(282g) Sender: L 5.8” x 3.5” x 1.0”(147.3 x 88.5 x 25 mm), 13.03oz(376g) |
Power | 2-Pin Lemo 7-28 VDC 2-Pin Lemo 7-28 VDC |
Bolt Pro 300
The Teradek Bolt Pro wirelessly transmits an uncompressed HD video signal in up to 1080p60 4:2:2 as far as 300ft with zero delay. The receiver features two 3G-SDI outputs for dual monitoring. The transmitter has a looping SDI output for local monitoring, a 70 minute internal battery, and can connect to more than one receiver in order to multiply the outputs.
Price on Enquiry – Auckland | Wellington
More Information
Wireless 1080p60 4:2:2
The Bolt Pro Transmitter and Receiver set can wirelessly transmit 1080p60 4:2:2 up to 300 ft with zero delay.
1 TX to Multiple RX
A second and even more than two receivers can be added into the setup. One Bolt Pro transmitter can transmit full 1080p60 HD video to multiple receivers simultaneously. Bolt receivers have dual 3G-SDI outputs, which can connect to field monitors, switchers, and also Teradek Cube Encoders.
WSDI Pro Connectivity
Bolt transmits uncompressed video using WSDI Pro, which provides a wireless range of up to 300 ft and can co-exist with other wireless equipment by dynamically adjusting the frequency bands used in real time. Bolt Pro transmitters have loop-through SDI outputs that you can connect to local monitors or recorders.
Internal Battery / P-Tap / Lemo DC for External Batteries
The transmitter has an internal 70 minute battery and a P-tap input for connecting to camera batteries. An AC power supply is included for the receiver. The transmitter and receiver each also have a Lemo DC input for connecting external V-mount or Gold-mount batteries.
Rugged Design
The transmitter has a milled aluminium body, and the receiver has an ABS plastic body. Both the transmitter and receiver have 1/4″ mounting threads and can be attached right onto or next to the equipment you’ll be using them with.
Transmitter | Video Input 3G-SDI, HD-SDI: BNC LOOPING VIDEO OUTPUT 3G-SDI, HD-SDI: BNC 5.1-5.8GHZ 14dbm per antenna + 5dbi antennas = 22dbm EIRP |
---|---|
Receiver | Video Output Dual 3G-SDI, HD-SDI: BNC 5.1-5.8GHZ 15dbm per antenna + 2dbi antenna = 17dbm EIRP |
Supported Resolutions | 1080p 50/60 1080i 50/59.94/60 1080p 23.98/24/25/30 720p 50/59.94/60 |
Audio | Embedded SDI audio, 2 channels |
Physical Size | Dimensions: TX: 4.3” x 2.6” x 1.0” RX: 6.0” x 4.6” x 1.0” Weight: TX: 249g RX: 476g |
Power | TX: 7W Power Input: 6-28V DC RX: 6W Power Input: 7-17V DC Gold Mount or V-mount Battery Options |